Mirror Control Switch
Remove mirror control switch. Using an ohmmeter, check for continuity between terminals when switch is operated as specified. See MIRROR SWITCH CONTINUITY TEST table. See Figure . If continuity is not as specified, replace mirror control switch.
MIRROR SWITCH CONTINUITY TEST
| Switch Position | Continuity Between Terminals No. | |
|---|---|---|
| Left Mirror | ||
| Up | 2 & 3; 4 & 7 | |
| Down | 2 & 4; 7 & 8 | |
| Left | 1 & 8; 4 & 7 | |
| Right | 1 & 4; 5 & 7 | |
| Right Mirror | ||
| Up | 3 & 6; 4 & 7 | |
| Down | 4 & 6; 5 & 7 | |
| Left | 4 & 7; 5 & 8 | |
| Right | 4 & 5; 7 & 8 | |