Key Programming - Without Using 2 Programmed Keys

NOTE: This procedure is used when customer needs extra keys programmed and 2 programmed keys are not available, but system has 2 ignition keys programmed. A maximum of 8 keys can be programmed. If 8 keys are already programmed, this procedure will not allow any more keys to be programmed. The number of programmed keys can be determined by accessing instrument cluster PID NUMKEYS with New Generation Star (NGS) tester.

Connect New Generation Star (NGS) tester to Data Link Connector (DLC). DLC is located under instrument panel, right of steering column. Insert Ford Service Function (FSF) card in NGS tester. Insert unprogrammed key in ignition and turn ignition switch to RUN position. Perform security access procedure. See KEY PROGRAMMING - SECURITY ACCESS PROCEDURE . Select IGNITION KEY CODE PROGRAM. Turn ignition switch to LOCK position. Disconnect NGS tester. Key should now be programmed and be able to start vehicle.