FixVault
Home › Lincoln › 2001 › Town Car Signature › Repair and Diagnosis (Single Page) › Body & Frame › Door Locks › Anti-Theft Systems - Passive › Programming › Key Programming - Security Access Procedure

Key Programming - Security Access Procedure

NOTE: Security access must be granted to erase ignition keys, enable/disable spare key programming switch, or perform parameter resets for instrument cluster and Powertrain Control Module (PCM).

Connect New Generation Star (NGS) tester to Data Link Connector (DLC). DLC is located under instrument panel, right of steering column. Insert Ford Service Function (FSF) card into NGS tester. Turn ignition switch from LOCK to RUN position. Using NGS tester, select SECURITY ACCESS PROCEDURE. This procedure will take 10 minutes to perform, during which ignition switch must be in RUN position and NGS tester must remain connected to vehicle. After the security access procedure has been completed, a new menu will be displayed with command options. Select as many functions as required before exiting this menu. Once this menu is exited, security access procedure must be performed again to perform additional commands.

About FixVault