Output State Control (OSC) Mode: Notes

NOTE: In order to operate OSC, a KOEO On-Demand Self Test and a KOER On-Demand Self Test may need to be carried out to verify that no diagnostic trouble codes (DTCs) related to the digital transmission range (TR) sensor or the vehicle speed sensor (VSS) are present.

Output state control (OSC) allows the technician to function the main components of the transmission quickly and easily and provides accurate information to correctly diagnose the transmission. OSC allows the technician to take control of certain parameters to function the transmission. For example, OSC allows the technician to shift the transmission only when commanding a gear change. If the technician commands 1st gear in OSC, the transmission will remain in 1st gear until the technician commands the next gear. For another example, the technician can command a shift solenoid to turn on or off while carrying out an electrical circuit check. OSC has two modes of operation for transmission, the BENCH MODE and the DRIVE MODE. Each mode/parameter has a unique set of vehicle operating requirements that the technician is required to meet before being allowed to operate OSC.