FixVault
Home › Lincoln › 2002 › Town Car Base › Repair and Diagnosis › Heating, Ventilation & A/C (HVAC) › HVAC Control Systems › HVAC System - Control Components › Removal And Installation › Control Assembly › Removal

Control Assembly: Removal

  1. Remove the center instrument panel finish panel.
    Fig 1: Removing Center Instrument Panel Finish Panel
    G02237765Courtesy of FORD MOTOR CO.
  2. Disconnect the wire harness connector.
    Fig 2: Disconnecting Wire Harness Connector
    G02237766Courtesy of FORD MOTOR CO.
  3. Remove the screws and pull the electronic automatic temperature control module from the instrument panel.
    Fig 3: Removing Electronic Automatic Temperature Control Module Screws
    G02237767Courtesy of FORD MOTOR CO.
  4. Remove the electronic automatic temperature control module.
    • Remove the nuts and the vacuum harness.
    • Disconnect the wire harness connectors and remove the electronic automatic temperature control module.
    Fig 4: Removing Electronic Automatic Temperature Control Module
    G02237768Courtesy of FORD MOTOR CO.
About FixVault