FixVault
Home › Lincoln › 2003 › Aviator AWD › Repair and Diagnosis › External Pages › Different car › Section 1366 (Automatic Transmission) › In-Vehicle Repair › Reverse Servo Assembly › Removal

Reverse Servo Assembly: Removal

WARNING: This page is about a different car, the 2005 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the main control valve body. For additional information, refer to MAIN CONTROL VALVE BODY .
  2. Using the special tool, remove the reverse band servo retaining ring.
    1. Compress the servo spring.
    2. Remove the reverse band servo retaining ring.
    Fig 1: Removing/Installing Reverse Band Servo Retaining Ring Using Special Tool
    G03963989Courtesy of FORD MOTOR CO.
  3. Remove the reverse servo assembly.
    1. Remove the reverse band servo cover.
    2. Remove the reverse band servo piston and rod.
    3. Remove the reverse band servo spring.
    Fig 2: Removing Reverse Band Servo Assembly
    G03888636Courtesy of FORD MOTOR CO.
About FixVault