Removal and Installation

WARNING: This page is about a different car, the 2005 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the battery ground cable. For additional information, Refer to BATTERY, MOUNTING AND CABLES .
Disconnect the accelerator pedal sensor electrical connector.

Fig 1: Disconnecting Accelerator Pedal Sensor Electrical Connector
Courtesy of FORD MOTOR CO.
Remove the two bolts and the accelerator pedal assembly.

Fig 2: Removing Two Bolts And Accelerator Pedal Assembly
Courtesy of FORD MOTOR CO.
To install, reverse the removal procedure.