Throttle Body: Installation

WARNING: This page is about a different car, the 2004 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.

Install a new TB gasket, the throttle body and the bolts.
- Tighten the bolts in two stages.
  - Stage 1: Tighten to 9 Nm (80 lb-in).
  - Stage 2: Rotate an additional 90 degrees.
  Fig 1: Installing TB Gasket, Throttle Body And Bolts
  Courtesy of FORD MOTOR CO.
- Connect the accelerator cable, the speed control cable and the throttle return spring.
  
  Fig 2: Connecting Accelerator Cable, Speed Control Cable And Throttle Return Spring
  Courtesy of FORD MOTOR CO.
- Connect the TP sensor electrical connectors.
  
  Fig 3: Connecting TP Sensor Electrical Connectors
  Courtesy of FORD MOTOR CO.
- Install the resonator and tube. For additional information, refer to INTAKE AIR DISTRIBUTION & FILTERING .