Inspection and Verification
CAUTION:
When internal wear or damage occurs in the transmission, metal particles, clutch plate material and band material can travel into the torque converter, the fluid cooler tubes, the intank transmission fluid cooler and the auxiliary transmission fluid cooler, if so equipped. These contaminants are a major cause of recurring transmission concerns. To prevent future concerns, remove these contaminants from the cooling system before placing the transmission back into use. Refer to
AUTOMATIC TRANSAXLE/TRANSMISSION-4R100
or
AUTOMATIC TRANSAXLE/TRANSMISSION-4R70W
for fluid cooler flow testing, backflushing and cleaning, torque converter cleaning and inspection, and flushing. Refer to
AUTOMATIC TRANSAXLE/TRANSMISSION-4R100
for cooler bypass valve (CBV) assembly cleaning and flushing.
- Visually inspect for obvious signs of mechanical damage, incorrect component installation and system leaks. Repair as necessary.
- Install a new or remanufactured radiator when fluid is found leaking from the intank transmission fluid cooler. For additional information, refer to ENGINE COOLING .
- Install a new auxiliary transmission fluid cooler if there is leakage from the fluid cooler. For additional information, refer to ENGINE COOLING .
- If the fault is not visually evident, GO to SYMPTOM CHART