Compass Calibration-With Message Center

NOTE: For optimum calibration, drive to an open, level location away from large metallic objects or structures. Switch off all non-essential electrical accessories (rear window defrost, heater A/C, map lamps, wiper, etc.) and make sure all the doors are closed.

Start the vehicle.
Locate the compass module at the base of the mirror.

Fig 1: Locating Compass Module At Base Of Mirror
Courtesy of FORD MOTOR CO.

NOTE: To exit CAL mode before carrying out a compass adjustment, turn thw ignition switch to the OFF position.

Fig 2: Locating LH Top Compass Sensor Module Button

Courtesy of FORD MOTOR CO.

Press the RESET button located on top LH side of the compass module until ZONE appears. Continue to hold the button down until CIRCLE SLOWLY TO CAL is displayed in the message center display.
Slowly drive the vehicle in a circle at no more than five times at no more than 5 km/h (3 mph) until CIRCLE SLOWLY TO CAL changes to CALIBRATION COMPLETED in the message center.