FixVault
Home › Lincoln › 2003 › Town Car Protection Series › Repair and Diagnosis › Accessories & Equipment › Cruise Control Systems › Removal And Installation › Speed Control Deactivator Switch › Installation

Speed Control Deactivator Switch: Installation

  1. Fully depress the brake pedal.
  2. Install the deactivator switch.
    1. Position the deactivator switch in the bracket and rotate clockwise.
    2. Connect the electrical connector.
    Fig 1: Installing Deactivator Switch
    G01338078Courtesy of FORD MOTOR CO.
  3. Slowly release the brake pedal.
  4. Connect the battery ground cable.
About FixVault