Removal and Installation

WARNING: This page is about a different car, the 2005 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the battery ground cable. For additional information, Refer to BATTERY, MOUNTING AND CABLES .
Release the clips and disconnect the three powertrain control module (PCM) electrical connectors.

Fig 1: Releasing Clips
Courtesy of FORD MOTOR CO.
Remove the PCM retaining bolt and remove the PCM from the mounting bracket.
- To install, tighten to 10 Nm (89 lb-in).
Fig 2: Removing PCM Retaining Bolt
Courtesy of FORD MOTOR CO.
To install, reverse the removal procedure.