Removal and Installation
CAUTION:
Prior to removal of the vehicle security module, it is necessary to upload the module configuration information to a diagnostic tool. This information needs to be downloaded into the new module once it is installed. Refer to MODULE CONFIGURATION
.
- Remove the right rear quarter trim panel. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION .
- Disconnect the vehicle security module electrical connectors.
- Remove the 3 screws and the vehicle security module.
- To install, reverse the removal procedure.
- Once the module is installed, it is necessary to download the module configuration information from the diagnostic tool into the new module. For additional information, refer to MODULE CONFIGURATION .