FixVault
Home › Lincoln › 2005 › Aviator AWD › Repair and Diagnosis › Engine Mechanical › Mechanical › Engine System-General Information › General Procedures › Connecting Rod Large End Bore

Connecting Rod Large End Bore

  1. Tighten the bolts to specification, then measure the bore in 2 directions. The difference is the connecting rod bore out-of-round. Verify the out-of-round is within specification.
    • Refer to the appropriate article in ENGINE for the procedure.
    • If out of specification, install new components as necessary. Refer to the appropriate article in ENGINE for the procedure.
    Fig 1: Measuring Connecting Rod Large End Bore
    G03862280Courtesy of FORD MOTOR CO.
About FixVault