Symptom Chart

SYMPTOM CHART

Condition	Possible Sources	Action
The shift interlock system does not release/lock correctly	Circuit(s). Fuse(s). Shift lock actuator. Brake pedal position (BPP) switch.	GO to PINPOINT TEST A .
The shift control is out of correct gear relationship	Shift control component(s). Internal transmission component(s).	GO to PINPOINT TEST B .
The selector lever indicator does not correspond to the gear	Selector lever indicator adjustment.	CHECK that the selector lever indicator adjustment is correct. REFER to SELECTOR LEVER INDICATOR ADJUSTMENT . ADJUST the selector lever indicator if necessary. TEST the system for normal operation. If the condition persists, GO to PINPOINT TEST B .
The control linkage is binding	Shift control component(s). Internal transmission component(s).	GO to PINPOINT TEST C .
The gearshift lever will not shift from range	Shift control component(s). Internal transmission component(s).	GO to PINPOINT TEST C .
The selector lever indicator does not illuminate	Instrument cluster.	Refer to INSTRUMENT CLUSTER AND PANEL ILLUMINATION .
The transmission control switch (TCS) does not operate correctly	TCS not cycled during self-test. Fuse. TCS. Circuit(s). Powertrain control module (PCM). Instrument cluster.	GO to PINPOINT TEST D .
The transmission control indicator lamp (TCIL) does not illuminate	TCS. Circuit(s). Instrument cluster. PCM.	GO to PINPOINT TEST D .
The transmission control indicator lamp (TCIL) is illuminated continuously	Circuit(s). Instrument cluster. PCM.	GO to PINPOINT TEST E .
Rattle, noise, buzz or other noise	Gearshift lever. Steering column shrouds.	INSPECT the gearshift lever and shrouds for damage and incorrect installation. REPAIR as necessary. REFER to SELECTOR LEVER .
Water enters inside the vehicle	Shift cable rubber grommet.	SECURE the grommet to the bulkhead.
Water enters inside the vehicle	Torn shift cable rubber grommet.	INSTALL a new shift cable and bracket. REFER to SELECTOR LEVER CABLE AND BRACKET .