FixVault
Home › Lincoln › 2006 › LS › Repair and Diagnosis › Engine Performance › Remove, Overhaul & Install › Electronic Engine Controls › Removal And Installation › Mass Air Flow (MAF) Sensor › Removal and Installation

Removal and Installation

  1. Disconnect the battery ground cable. For additional information, refer to BATTERY MOUNTING AND CABLES .
  2. Disconnect the mass air flow (MAF) sensor electrical connector.
  3. Remove the 2 bolts and the MAF sensor.
    • To install, tighten to 2 Nm (18 lb-in).
  4. To install, reverse the removal procedure.
About FixVault