FixVault
Home › Lincoln › 2006 › LS › Repair and Diagnosis › External Pages › Different car › Section 548 (MULTIFUNCTION Electronic Modules System) › Removal And Installation › Driver Seat Module (DSM) › Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Mercury Montego, 2006 Ford Freestyle, and 2006 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the driver seat. For additional information, refer to REMOVAL .
  2. If equipped, position the climate controlled seat module aside.
  3. Disconnect the DSM electrical connectors.
  4. Remove the 2 rivets and the DSM.
  5. To install, reverse the removal procedure.
    • Use the special tool to install the 2 rivets.
About FixVault