FixVault
Home › Lincoln › 2006 › LS › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transaxle-Transmission › In-Vehicle Repair › Transmission Support Insulator › Removal and Installation

Removal and Installation

  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING AND LIFTING .
  2. Support the transmission with a transmission jack.
  3. Remove the rear transmission crossmember-to-floor pan screws.
    • To install, tighten to 63 Nm (46 lb-ft).
  4. Remove the transmission insulator-to-extension housing center screws.
    • To install, tighten to 48 Nm (35 lb-ft).
  5. Remove the rear transmission crossmember.
  6. To install, reverse the removal procedure.
About FixVault