FixVault
Home › Lincoln › 2006 › Mark LT 4WD › Repair and Diagnosis (Single Page) › Accessories & Equipment › Communication Devices › Module Configuration - F150 & Mark LT › General Procedures › Programmable Module Installation › Using the Vehicle Communication Module (VCM) When the Original Module is Not Available › Notes

Using the Vehicle Communication Module (VCM) When the Original Module is Not Available: Notes

NOTE: If PMI fails on the first attempt, exit the diagnostic tool PMI application and carry out the procedure again.
  1. INSTALL the new module.
  2. Using the VCM and the latest software version, SELECT: Programmable Module Installation.
  3. Select the module being installed.
  4. Follow the on-screen instructions.
  5. SELECT: Retrieve Module Configuration - Old ECU and press trigger.
  6. Follow the on-screen instructions.
  7. The VCM attempts to retrieve the module data.
    • If the module data is available, go to STEP A .
    • If the VCM displays: "Call the As-Built Data Center", go to STEP B .
About FixVault