Component Testing Procedure
MAIN LIGHT SWITCH, EXTERIOR LAMPS COMPONENT TESTING
| Circuit to test | Connect self-powered test light or ohm-meter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Headlamp | 6 and 1 | Autolamps On | Open circuit |
| Off | Open circuit | ||
| Park | Open circuit | ||
| Head | Closed circuit | ||
| Park lamps | 10 and 5 | Autolamps On | Open circuit |
| Off | Open circuit | ||
| Park | Closed circuit | ||
| Head | Closed circuit | ||
| Autolamps | 6 and 2 | Autolamps On | Closed circuit |
| Off | Open circuit | ||
| Park | Open circuit | ||
| Head | Open circuit | ||
| Fog lamps | 9 and 7 | Autolamps On | Closed circuit |
| Off | Open circuit |