FixVault
Home › Lincoln › 2006 › Zephyr › Repair and Diagnosis (Single Page) › Body & Frame › Door Locks › Anti-Theft - Pats › General Procedures › Key Programming Switch State Control › Unlimited Key Mode Programming › Disabling Unlimited Key Mode

Disabling Unlimited Key Mode

  1. Using a diagnostic tool, select instrument cluster from the menu. Follow SECURITY ACCESS to obtain security access. For additional information, refer to ANTI-THEFT SECURITY ACCESS .
  2. Select: DISABLE UNLIMITED KEY MODE.
  3. Select: IGNITION KEY CODE ERASE.
  4. Disconnect the diagnostic tool and turn the ignition lock cylinder to the OFF position.
  5. Program 2 keys to enable the vehicle by turning each key to the ON position. Make sure that each key remains in the ON position for a minimum of 6 seconds.
  6. Program any additional keys using either the KEY PROGRAMMING USING TWO PROGRAMMED KEYS  or KEY PROGRAMMING USING DIAGNOSTIC EQUIPMENT .
About FixVault