FixVault
Home › Lincoln › 2007 › Town Car Signature, 4.6 V › Repair and Diagnosis › Engine Performance › Remove, Overhaul & Install › Electronic Engine Controls › Removal And Installation › Powertrain Control Module (PCM) › Removal

Powertrain Control Module (PCM): Removal

    NOTE: Any PCM replacement will require that ALL customer keys are available to be programmed at the time of installation. PCM replacement DOES NOT require new keys.
  1. Retrieve the module configuration. Carry out the module configuration retrieval steps of the Programmable Module Installation procedure. For additional information, refer to MODULE CONFIGURATION article.
  2. Release the clips and disconnect the 3 PCM electrical connectors.
    3. Fig 1: PCM Electrical Connectors
    GF0013798Courtesy of FORD MOTOR CO.
  3. Remove the bolt and the PCM.
About FixVault