FixVault
Home › Lincoln › 2007 › Town Car Signature, 4.6 W › Repair and Diagnosis › Engine Performance › Engine Control Systems › Acceleration Control System › Removal And Installation › Accelerator Pedal and Bracket › Removal

Accelerator Pedal and Bracket : Removal

  1. Disconnect the battery ground cable. For additional information, refer to BATTERY, MOUNTING AND CABLES article.
  2. Disconnect the accelerator pedal sensor electrical connector.
  3. Disconnect the accelerator pedal motor electrical connector.
  4. Disconnect the accelerator pedal motor drive cable connector.
  5. Remove the 3 accelerator pedal and bracket retaining nuts.
  6. Remove the accelerator pedal and bracket assembly.
About FixVault