Dual Climate Controlled Seat Module (DCSM): Installation
- Install the DCSM to the seat.
- Position the DCSM to the electrical bracket and install 2 new rivets.
- Connect the 3 DCSM electrical connectors and locking wedges.
- Install the front seat and repower the SRS. Do not prove out the SRS at this time. For additional information, refer to Seat - Front .
- Carry out the Occupant Classification Sensor (OCS) System Zero Seat Weight Test. For additional information, refer to the General Procedures portion of SUPPLEMENTAL RESTRAINT SYSTEM article.
- After installing the DCSM, carry out the appropriate steps in the PMI procedure. For additional information, refer to MODULE CONFIGURATION article.