FixVault
Home › Lincoln › 2008 › Mark LT RWD › Repair and Diagnosis (Single Page) › Body & Frame › Door Locks › Handles, Locks, Latches And Entry Systems - F-150 & Mark LT › General Procedures › Keyless Entry Keypad Code Programming › Programming A Personal Keyless Entry Keypad Code

Programming A Personal Keyless Entry Keypad Code

NOTE: Only one personal code can be stored. If a new personal code is programmed, the old personal code (if present) will be erased.
  1. Enter the factory set keyless entry keypad code.
  2. Within 5 seconds, press the 1/2 button on the keypad.
  3. Enter the personal 5-digit keyless entry keypad code. Each number must be pressed within 5 seconds of each other.
  4. The door locks will cycle to confirm that the new code is set.
About FixVault