FixVault
Home › Lincoln › 2009 › MKZ AWD › Repair and Diagnosis › External Pages › Different car › Section 1006 (Seating) › Removal And Installation › Memory Set Switch › Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2008 Mercury Milan, 2008 Lincoln MKZ, and 2008 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the driver interior door panel. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION article.
  2. Disconnect the electrical connector, release the 4 tabs and remove the memory SET switch.
  3. To install, reverse the removal procedure.
About FixVault