Removal and Installation

NOTE: This procedure applies to vehicles without navigation only. For vehicles with navigation, the Satellite Digital Audio Receiver System (SDARS) module is integral to the Audio Control Module (ACM).

NOTE: Module configuration is required when a new SDARS module is being installed.

Upload the SDARS module configuration information to the scan tool. For additional information, refer to Programmable Module Installation (PMI) in MODULE CONFIGURATION .
Remove the center console. For additional information, refer to INSTRUMENT PANEL AND CONSOLE .
Remove the 4 screws and the SDARS module.
- Disconnect the electrical connectors.
- To install, tighten the screws to 8 Nm (71 lb-in).
To install, reverse the removal procedure.
- Download the configuration information to the SDARS module. For additional information, refer to PMI in MODULE CONFIGURATION .