FixVault
Home › Lincoln › 2009 › Navigator RWD › Repair and Diagnosis › Engine Mechanical › Cooling System (Mechanical) › Engine Cooling System › Diagnosis And Testing › Engine Cooling › Component Test › Cap

Component Test: Cap

  1. Inspect the pressure relief cap and seals for damage or deterioration. Install a new pressure relief cap if necessary.
  2. Fit the pressure relief cap to the Pressure Test Kit using the correct adapter.
    3. NOTE: If the plunger of the pressure tester is depressed to fast, an incorrect pressure reading will result.
  3. Slowly pump the Pressure Test Kit until the pressure gauge stops increasing and note the highest pressure reading. Release the pressure and repeat the test. Install a new pressure relief cap if the pressure is not within the pressure listed in the SPECIFICATIONS .
About FixVault