FixVault
Home › Lincoln › 2011 › MKZ Base, AWD › Repair and Diagnosis › Engine Mechanical › Mechanical › Engine System - General Information › General Procedures › Connecting Rod Bushing Diameter

Connecting Rod Bushing Diameter

NOTE: Refer to the appropriate article in ENGINE MECHANICAL - 2.5L (EXCEPT HYBRID) , ENGINE MECHANICAL - 2.5L - (HYBRID) , ENGINE MECHANICAL - 3.0L (4V) or ENGINE MECHANICAL - 3.5L for the specification.
  1. Use a telescoping gauge to determine the ID of the connecting rod bushing, if equipped.
    Fig 1: Measuring Inner Diameter Of Connecting Rod Bushing Using Telescoping Gauge
    G07780461Courtesy of FORD MOTOR CO.
  2. Measure the telescoping gauge with a micrometer. Verify the diameter is within specification.
    Fig 2: Measuring Telescoping Gauge Reading Using Micrometer
    G07780462Courtesy of FORD MOTOR CO.
About FixVault