FixVault
Home › Lincoln › 2011 › Navigator RWD › Repair and Diagnosis › Engine Mechanical › Mechanical › Engine System - General Information › General Procedures › Connecting Rod Bushing Diameter

Connecting Rod Bushing Diameter

NOTE: Refer to the appropriate ENGINE MECHANICAL - 5.4L (3V) for the specification.
  1. Use a telescoping gauge to determine the ID of the connecting rod bushing, if equipped.
    Fig 1: Measuring Inner Diameter Of Connecting Rod Bushing
    G07456151Courtesy of FORD MOTOR CO.
  2. Measure the telescoping gauge with a micrometer. Verify the diameter is within specification.
    Fig 2: Measuring Telescoping Gauge With Micrometer
    G07456152Courtesy of FORD MOTOR CO.
About FixVault