FixVault
Home › Lincoln › 2012 › MKS Base, AWD › Repair and Diagnosis › Body & Frame › Seat System - Seats › Removal And Installation › Memory Set Switch › Removal and Installation

Removal and Installation

  1. Remove the driver door switch bezel.
    1. Pry up, release the clip at the rear and separate the driver door switch bezel.
    2. Disconnect the electrical connectors and remove the driver door switch bezel.
    Fig 1: Identifying Electrical Connectors And Driver Door Switch Bezel
    G06077135Courtesy of FORD MOTOR CO.
  2. Release the clips and remove the memory SET switch from the driver door switch bezel.
  3. To install, reverse the removal procedure.
About FixVault