FixVault
Home › Lincoln › 2012 › MKS Base, AWD › Repair and Diagnosis › Engine Performance › Remove, Overhaul & Install › Engine Controls - Electronic Engine Controls › Removal And Installation › Intake Air Temperature (IAT) Sensor › Removal and Installation

Removal and Installation

  1. Disconnect the Intake Air Temperature (IAT) sensor electrical connector.
  2. Remove the IAT sensor.
    • Lift the tab and turn the IAT sensor counterclockwise to remove.
      Fig 1: Locating Intake Air Temperature (IAT) Sensor Tab
      G06253949Courtesy of FORD MOTOR CO.
  3. To install, reverse the removal procedure.
    • Make sure the IAT sensor tab is fully seated during installation.
About FixVault