FixVault
Home › Lincoln › 2012 › MKX AWD › Repair and Diagnosis › External Pages › Different car › Section 1886 (Cruise Control System) › Removal And Installation › Cruise-Control Module (C-CM) › Cruise-Control Module (C-CM) or bracket › Removal

Cruise-Control Module (C-CM) or bracket: Removal

WARNING: This page is about a different car, the 2013 Lincoln MKX and 2013 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING & LIFTING .
  2. Remove the front bumper cover. For additional information, refer to BUMPERS .
  3. Gently pry the C-CM away from the retaining studs.
    • Disconnect the electrical connector.
  4. Inspect the C-CM grommets for any damage and install new grommets as necessary.

    Bracket 

  5. Remove the 4 bolts and the C-CM bracket assembly.
About FixVault