Transaxle Cooling - 6F50/6F55: Specifications
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Transmission Fluid | |
| The use of any transmission fluid other than what is recommended for this transaxle will cause transaxle damage. Refer to the material for the correct transmission fluid. | |
|
NOTE:
Do not use water-based cleaners to clean or flush the transmission fluid cooler tubes or transaxle damage will occur. Mineral spirits can be used to clean the transmission fluid cooler tubes, providing the transmission fluid cooler tubes are flushed with clean transmission fluid and blown dry with shop air. Use only clean transmission fluid designated for this transaxle and torque converter being serviced.
|
|
MATERIAL SPECIFICATIONS
| Item | Specification | Fill Capacity |
|---|---|---|
| Motorcraft® MERCON® LV Automatic Transmission Fluid XT-10-QLVC |
MERCON® LV | 10.5L (11.1 qt) |
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| Air Cleaner (ACL) bolt | 11 | - | 97 |
| ACL outlet pipe clamp | 5 | - | 44 |
| Battery tray bolts | 10 | - | 89 |
| Transmission mounted transmission fluid cooler tube bolts | 9 | - | 80 |
| Transmission fluid cooler tube bracket bolt | 6 | - | 53 |
| Transmission mounted transmission fluid cooler tube-to-thermal bypass nuts | 30 | 22 | - |
| Transmission fluid cooler return tube-to-transmission cooler nut | 25 | 18 | - |
| Transmission fluid thermal bypass valve nuts | 9 | - | 80 |