FixVault
Home › Lincoln › 2012 › MKX FWD › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission - 6F50/6F55 › In-Vehicle Repair › Output Shaft Speed (OSS) Sensor › Installation

Output Shaft Speed (OSS) Sensor: Installation

  1. Install the OSS sensor and the bolt.
    • Tighten to 12 Nm (106 lb-in).
      Fig 1: Locating OSS Sensor And Bolt
      G07931099Courtesy of FORD MOTOR CO.
  2. Install the main control valve body. For additional information, refer to MAIN CONTROL VALVE BODY .
About FixVault