Pinpoint Test D : The FCDIM (Front Control/Display Interface Module) Does Not Respond To The Scan Tool: Notes
WARNING: This page is about a different car, the 2015 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
The FCDIM Does Not Respond To The Scan Tool
Diagnostic Overview
Diagnostics in this service information assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods
Refer to Wiring Diagrams MODULE COMMUNICATIONS NETWORK for schematic and connector information.
Refer to Wiring Diagrams AUDIO SYSTEM/NAVIGATION for schematic and connector information.
Normal Operation and Fault Conditions
The FCDIM communicates with the scan tool through the MS-CAN. The IPC is used as the gateway module.
Visual Inspection and Diagnostic Pre-checks
Verify Body Control Module (BCM) fuse 67 (7.5A) is OK.