Powertrain/Drivetrain Mount Neutralizing: Adjustment

WARNING: This page is about a different variant/trim than selected.

NOTE: Refer to the appropriate article and procedure for special instructions on loosening and tightening mount fasteners.

REFER to: JACKING AND LIFTING - OVERVIEW (100-02 Jacking and Lifting, Description and Operation).
Loosen, but do not remove, the powertrain/drivetrain mount fasteners.
Lower the vehicle.
NOTE: Do not twist or strain the powertrain/drivetrain mounts or damage to the mounts may occur.

Start the vehicle and move it in forward 0.6 m (1.97 ft) - 1.2 m (3.94 ft). Then move the vehicle in reverse the same distance.
Raise and support the vehicle.
Tighten the powertrain/drivetrain mount fasteners.
Lower the vehicle.
Test the system for normal operation.