Component Testing Procedure
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Lock/unlock circuit | 6 and 8 | Rest | Open circuit |
| Lock | Open circuit | ||
| Unlock | Closed circuit | ||
| 6 and 7 | Rest | Open circuit | |
| Lock | Closed circuit | ||
| Unlock | Open circuit | ||
| Memory set 1 | 5 and 6 | Off | Open circuit |
| On | Closed circuit | ||
| Memory set 2 | 4 and 6 | Off | Open circuit |
| On | Closed circuit | ||
| Memory set 3 | 3 and 6 | Off | Open circuit |
| On | Closed circuit |