FixVault
Home › Lincoln › 2014 › MKT Base, FWD › Repair and Diagnosis › Steering › Steering Column › Removal And Installation › Heated Steering Wheel Module (HSWM) › Removal and Installation

Removal and Installation

  1. If a new HSWM  is being installed, connect the scan tool and upload the module configuration information from the HSWM  . Refer to PMI  in MODULE CONFIGURATION .
  2. G08722014
  3. G08722015
  4. G08722016
  5. G08722017
  6. G08722018
    1. -
    2. To install, tighten to 7 Nm (62 lb-in).
    3. -
      G08722019
  8. To install, reverse the removal procedure.
    • If a new HSWM  was installed, it must be configured (using vehicle as-built data or module configuration information retrieved earlier in this procedure). Refer to PMI  in MODULE CONFIGURATION .
About FixVault