FixVault
Home › Lincoln › 2014 › Navigator Base, 4WD › Repair and Diagnosis › Electrical › Body Electrical › OEM Connector Repair Procedures › Connector Repair Procedures › Electrical Short Inside The Harness

Electrical Short Inside The Harness

  1. Solder coated wire to ground
  2. Harness protective tape
  3. Intermittent short

    Solder coated wire pierced through the insulation of another circuit.

  4. Grounding foil
    Fig 1: Identifying Electrical Short Inside Harness
    G09220332Courtesy of FORD MOTOR CO.
About FixVault