Main Control Cover: Installation

• 1.
  
  Check for damage. Visual check.

Courtesy of FORD MOTOR COMPANY

• 2.
  
  
  NOTE: Install the studbolts in the correct locations as noted during disassembly.

Courtesy of FORD MOTOR COMPANY

• 3.
  
  
  • Tighten to 12 Nm (106 lb-in).

Courtesy of FORD MOTOR COMPANY

• 4.
  
  
  • Tighten to 9 Nm (80 lb-in).

Courtesy of FORD MOTOR COMPANY

• 5.
  
  Visual check. Apply the specified lubricant to the specified component. Material: Motorcraft ® MERCON ® LV Automatic Transmission Fluid XT-10-QLVC.

  • 1.
    
    Seal (7D258)

  • 2.
    
    Backing ring (7J324)

Courtesy of FORD MOTOR COMPANY

• 6.
  
  

Courtesy of FORD MOTOR COMPANY

• 7.
  
  
  • Tighten the bolt to 9 Nm (80 lb-in).
  • Tighten the nut to 30 Nm (22 lb-ft).

Courtesy of FORD MOTOR COMPANY

• 8.
  
  

Courtesy of FORD MOTOR COMPANY

• 9.
  
  

Courtesy of FORD MOTOR COMPANY

• 10.
  
  Install the ACL assembly. Ford additional information, refer to Intake Air Distribution and Filtering .

• 11.
  
  Fill with clean transmission fluid to the correct level.