Strut and Spring Assembly: Installation

• 1.
  
  
  • Tighten to 63 Nm (46 lb-ft).

Courtesy of FORD MOTOR COMPANY

• 2.
  
  
  • Tighten to 225 Nm (166 lb-ft).

Courtesy of FORD MOTOR COMPANY

• 3.
  
  
  NOTE: If equipped with dynamic suspension.
  • Tighten to 30 Nm (22 lb-ft).

Courtesy of FORD MOTOR COMPANY

• 4.
  
  
  • Tighten to 150 Nm (111 lb-ft).

Courtesy of FORD MOTOR COMPANY

• 5.
  
  Install the wheel and tire. Refer to Wheels and Tires .

• 6.
  
  Check front camber adjustment. Refer to Suspension System - General Information

• 7.
  
  If equipped with dynamic suspension, calibrate the suspension height sensor. Connect the scan tool and carry out the Ride Height Calibration routine. Follow the scan tool directions.