FixVault

Transaxle Case: Disassembly

  1. 1.

    Special Tool(s): Remover/Installer, Front Wheel Hub 204-069 (T81P-1104-C), Transfer Gear Bearing Race Remover 307-577
GFD88774Courtesy of FORD MOTOR COMPANY

  1. 2.

    Punch a hole in the fluid dam. Center punch.
GFD88775Courtesy of FORD MOTOR COMPANY

  1. 3.

    General Equipment: Dent Puller
GFD88776Courtesy of FORD MOTOR COMPANY

  1. 4.

    Special Tool(s): Differential Bearing Cup Remover 307-586

    1. 1.

      Position the Differential Bearing Cup Remover 307-586 in the transmission case with the tabs on the Differential Bearing Cup Remover 307-586 aligned with the slots in the transmission case.

    1. 2.

      Expand the Differential Bearing Cup Remover 307-586 by hand.

    1. 3.

      While holding the Differential Bearing Cup Remover 307-586 in the expanded position with the tabs in the slots of the transmission case, tighten the nut.
GFD88777Courtesy of FORD MOTOR COMPANY

  1. 5.

    General Equipment: Shop Press
GFD88778Courtesy of FORD MOTOR COMPANY

  1. 6.

GFD88779Courtesy of FORD MOTOR COMPANY

  1. 7.

GFD88780Courtesy of FORD MOTOR COMPANY

  1. 8.

GFD88781Courtesy of FORD MOTOR COMPANY

  1. 9.

GFD88782Courtesy of FORD MOTOR COMPANY