Transaxle Case: Assembly

1. 1.
   
   Special Tool(s): Handle 205-153 (T80T-4000-W), Oil Dam Seal Installer 307-583

Courtesy of FORD MOTOR COMPANY

1. 2.
   
   Special Tool(s): Handle 205-153 (T80T-4000-W), Oil Dam Seal Installer 307-583

Courtesy of FORD MOTOR COMPANY

1. 3.
   
   Inspect the transfer shaft fluid dam to be sure it is seated evenly into the transmission case. Visual check.

Courtesy of FORD MOTOR COMPANY

1. 4.
   
   Special Tool(s): Bearing Cup Installer 307-576 General Equipment: Shop Press

Courtesy of FORD MOTOR COMPANY

1. 5.
   
   Special Tools(s): Bearing Cup Installer 307-689

Courtesy of FORD MOTOR COMPANY

1. 6.
   
   Special Tool(s): Bearing Cup Installer 307-689, Installer, Transfer Gear Bearing 307-541, Drawbar 204-029

Courtesy of FORD MOTOR COMPANY

1. 7.
   
   

Courtesy of FORD MOTOR COMPANY

1. 8.
   
   

Courtesy of FORD MOTOR COMPANY

1. 9.
   
   

Courtesy of FORD MOTOR COMPANY

1. 10.
   
   
   • Tighten to 12 Nm (106 lb-in).

Courtesy of FORD MOTOR COMPANY

1. 11.
   
   Remove the torque converter housing differential and transfer shaft bearing races to select a new differential or transfer shaft shim. Refer to Torque Converter Housing .