FixVault
Home › Lincoln › 2016 › Navigator Reserve, RWD › Repair and Diagnosis › Body & Frame › Seats › Seating System › Removal And Installation › Seat Control Switch - Third Row › Removal And Installation

Removal And Installation

  1. 1.

    Release and remove the tray from the RH rear quarter trim panel.
    NOTE: The LH and RH switch wiring harness electrical connectors are not interchangeable.

  1. 2.
    Remove the affected seat control switch.
    • Release the 2 retaining tabs and detach the seat control switch from the RH rear quarter trim panel.
    • Pull the seat control switch through the opening and disconnect the electrical connector.

  1. 3.

    To install, reverse the removal procedure.
About FixVault