Ignition Coil-On-Plug: Removal

• 1.
  
  Remove the oil filler cap and remove the engine appearance cover. Install the oil filler cap.

Courtesy of FORD MOTOR COMPANY

NOTE: When removing or installing the fuel injection pump noise insulator, spreading the openings will reduce the risk of damage.
• 2.
  Remove the fuel injection pump noise insulator.

Courtesy of FORD MOTOR COMPANY

• 3.
  
  Disconnect the ignition coil-on-plug electrical connectors and the high-pressure fuel pump electrical connector.

Courtesy of FORD MOTOR COMPANY

NOTE: Use compressed air to remove any foreign material from the ignition coil-on-plugs and surrounding area before removing the ignition coil-on-plugs.
• 4.
  Remove the ignition coil-on-plug mounting bolts and remove the ignition coil-on-plugs.

Courtesy of FORD MOTOR COMPANY