In-Vehicle Temperature Sensor: Removal

NOTE: Removal steps in this procedure may contain installation details.

• 1.
  
  Remove the lower steering column cover screws and the lower steering column cover.
  • Disconnect the electrical connector.

Courtesy of FORD MOTOR COMPANY

• 2.
  
  Remove the bolts and the steering column reinforcement panel.
  • To install, tighten to 9 Nm (80 lb-in).

Courtesy of FORD MOTOR COMPANY

• 3.
  
  Remove the in-vehicle temperature sensor in the following sequence.

  • 1.
    
    Disconnect the in-vehicle temperature sensor electrical connector.

  • 2.
    
    Disconnect the aspirator hose.

  • 3.
    
    Detach the in-vehicle temperature sensor from the instrument panel finish panel.

Courtesy of FORD MOTOR COMPANY