Fuel Pump Driver Module (FPDM): Removal

NOTE: The FPDM (fuel pump driver module) is located in front of the left rear wheel well and above the air deflector.

1. With the vehicle in NEUTRAL, position it on a hoist. Refer to: Jacking and Lifting - Overview .
2. Remove the right rear air deflector retainers, remove the pushpin and then remove the right rear air deflector.

   Courtesy of FORD MOTOR COMPANY

3. Disconnect the FPDM electrical connector.

   Courtesy of FORD MOTOR COMPANY

4. Remove the FPDM retaining nuts and then remove the FPDM.

Courtesy of FORD MOTOR COMPANY