Pinpoint Test E : Easy Exit/Easy Entry Is Inoperative/Does Not Operate Correctly: Notes

Normal Operation 

The Driver Seat Module (DSM) receives a key out command over the Medium Speed Controller Area Network (MS-CAN) and powers the driver seat rearward about 2 in (50.8 mm) maximum.

This pinpoint test is intended to diagnose the following: 

• Easy entry/exit feature is not enabled
• Wiring, terminals or connectors
• Missing status information (Controller Area Network (CAN) communication bus messages):
  • Key-in-ignition status
  • Gear selector position

• Start/stop switch
• DSM