FixVault
Home › Lincoln › 2017 › MKT Base, AWD › Repair and Diagnosis › Heating, Ventilation & A/C (HVAC) › HVAC Control Systems › Climate Control System › Removal And Installation › In-Vehicle Temperature and Humidity Sensor › Removal And Installation

Removal And Installation

  1. Remove the 2 steering column opening trim panel screws.
  2. Detach the in-vehicle temperature sensor from the steering column opening trim panel and remove the steering column opening trim panel.

    • Disconnect the electrical connector.

  3. Disconnect the in-vehicle temperature sensor electrical connector.
  4. Rotate the in-vehicle temperature sensor clockwise to disconnect it from the aspirator hose and remove the in-vehicle temperature sensor.
  5. To install, reverse the removal procedure.
About FixVault